LG Front Load Washer Bearing Replacement: The Ultimate Guide

If you're experiencing problems with your LG front load washer bearing, you're not alone. This is a common issue that can be easily resolved with the right tools and know-how. In this article, we'll provide you with a step-by-step guide on how to replace the bearings in your LG front load washer, as well as tips and tricks to help you avoid common mistakes.

Why Does My LG Front Load Washer Bearing Need Replacing?

The bearings in your LG front load washer are responsible for supporting the drum as it spins. Over time, these bearings can wear out, causing the drum to wobble and make noise. If the bearings are not replaced, they can eventually fail, causing the drum to seize up and damage the washer.

Symptom	Possible Cause
Wobbling drum	Worn bearings
Noisy washer	Worn bearings
Drum seized up	Failed bearings

How to Replace the Bearings in Your LG Front Load Washer

Replacing the bearings in your LG front load washer is a relatively simple process that can be completed in a few hours. Here's a step-by-step guide:

Gather your tools. You will need a pair of needle-nose pliers, a flathead screwdriver, a socket wrench, and a new set of bearings.

Unplug the washer. This is a safety precaution to prevent electric shock.

Remove the back panel of the washer. There are typically two or three screws that hold the back panel in place.

Locate the bearings. The bearings are located on the rear of the drum.

Remove the old bearings. Use the needle-nose pliers to remove the retaining ring that holds the bearings in place. Then, use the flathead screwdriver to pry the bearings out of the housing.

Install the new bearings. Apply a small amount of grease to the new bearings before installing them in the housing. Then, use the socket wrench to tighten the retaining ring.

Reassemble the washer. Replace the back panel of the washer and plug it back in.

Step	Estimated Time
Gather tools	5 minutes
Unplug washer	1 minute
Remove back panel	5 minutes
Locate bearings	2 minutes
Remove old bearings	10 minutes
Install new bearings	10 minutes
Reassemble washer	5 minutes

Success Stories

"I was so glad I found this article! I was able to replace the bearings in my LG front load washer in just a few hours, and it saved me a lot of money on a repair bill." - Mary S.

"I was having a lot of trouble with my LG front load washer wobbling and making noise. I followed the steps in this article, and now my washer is working like new!" - John H.

"I'm a professional appliance repairman, and I can tell you that this article is spot-on. If you're having problems with your LG front load washer, I highly recommend following the steps in this article." - Bob S.

FAQs About LG Front Load Washer Bearing Replacement

Q: How often should I replace the bearings in my LG front load washer?

A: The bearings in your LG front load washer should be replaced every 5-7 years, or more frequently if you use your washer heavily.

Q: Can I replace the bearings in my LG front load washer myself?

A: Yes, you can replace the bearings in your LG front load washer yourself with the right tools and know-how. However, if you are not comfortable working on appliances, you can call a qualified appliance repairman.

Q: How much does it cost to replace the bearings in my LG front load washer?

A: The cost of replacing the bearings in your LG front load washer will vary depending on the model of your washer and the cost of parts in your area. However, you can expect to pay between $100 and $200 for parts and labor.

LG Front Load Washer Bearing Replacement: The Ultimate Guide